Test and Development

Measurements

We are able to realize tests and development projects with our modern mobile and stationary test instrumentation and the assistance of our qualified staff. By using our services you will not face any loss of capacity in your facility. Our own prototype shop guarantees a very efficient and cost-saving trial installation.

With a 3 to 32-Channel data aquisition system (stationary or mobile) we are able to perform extensive test projects. With special vibration analysis software we can calculate and represent the motions of the measured structures. All measurements and analysis we can perform at the facilities of our customer.

Our test stands Electrodynamic vibrator Rail test stand Wheel test stand Climatic chamber Sound insulation cabin (anechoic chamber)
Tests Fatigue tests Endurance tests Vibration tests Temperature tests Acoustic tests

Our test laboratory

Electrodynamic vibrator

Shock and vibration tests of electronic or
mechanical components (mechanical structures,
hard disk drives, CD-ROM drives, etc.)
Development of shock- and vibration isolators
Development of tuned damper systems
Development of tuned dampers and vibration
absorbers

Existing sensors

Electrodynamic vibrator

Accelerometer

Shock sensor (up to 20.000g !)

Force sensors

Measuring microphones

Impulse force hammer

temperature sensors

(contactless)

Efficiency of the electrodynamic vibrator

	Peak sine vector force		7.500 N
	Random rms force		6.000 N
	Frequency range		0,1 to 4.500 Hz
	First major resonance		3.600 Hz +/-5%
	Maximum acceleration		85 g
	Maximum velocity		1,52 m/s
	Maximum displacement		25,4 mm
	Inclination of the table		0-90° (infinitely variable)
	Maximum permissible load (for horizontal and vertical tests)		200 Kg
	Climatic chamber		-25 bis +80°C
	Anechoic chamber
	Vibration control signal		Sine, Random and Shock

Our Services

Test and Development

Measurements